HY-2 Paint Mist Coagulant
Category:
Product Features:
★ Liquid product; easy to add and free of dust pollution.
★ Non-corrosive, safe for humans, low equipment requirements, and easy to control;
★ Strong paint-degrading capability and wide applicability;
★ Thoroughly breaks down paint adhesion, with excellent suspension of paint sludge for easy removal;
★ Low price and low operating costs.
HY-2 paint mist coagulant, formulations A and B, is suitable for wastewater from automotive OEMs, hardware painting, plastic painting, furniture painting plants, and other industries. It effectively reduces viscosity, disperses paint particles, promotes flocculation, and keeps suspended solids in suspension.
Service Hotline: +86-513-88442062
Consult
Product Details
HY-2 Paint Mist Coagulant is a widely used, highly versatile paint mist coagulant. This product consists of HY-2 (A) and HY-2 (B), forming a two-component liquid formulation.
Typical Data
| Project | Quality indicators | |
| Component A | Component B | |
| Appearance | Pale yellow viscous liquid | Colorless viscous liquid |
| pH value | 7.5–9.5 | 3-5 |
Precautions
How to use
1. Usage concentration: Slot matching Component A: 0.5–1.5% (adjust as appropriate based on the amount of paint)
Production top-up Add component A and component B in the specified ratio.
Due to variations in the types of paint used on site and the spray-painting equipment, the specific formulation of the paint bath and the amount of additives to be replenished shall be determined by technical personnel based on on-site observations.
2. Mixing method: Fill the recirculating water tank with water to the specified volume, start the circulation pump, then add the calculated amount of Component A. Once the mixture is evenly circulated, it is ready for use. When painting begins and overspray accumulates in the recirculating water tank, begin dripping in both Component A and Component B.
3. Functions of the components: Component A primarily works to break down the viscosity of the paint; if its concentration is too low, the paint is not completely broken down, resulting in sticky paint sludge; if the concentration is too high, the paint sludge becomes excessively fine. Component B mainly facilitates the coalescence and aggregation of the fine paint sludge produced after the paint is broken down, thereby accelerating the floating-up rate of the sludge and making sludge removal more convenient.
4. Material Addition and Management: For equipment operating in stable production mode, the dosing pump enables precise control of the make-up addition rate. Under normal operating conditions, the ratio of make-up additions A to B is approximately 1:2. However, due to variations in on-site paint types and spray equipment, the specific formulation for the bath and the corresponding make-up dosages shall be determined by technical personnel based on field observations.
Based on actual production conditions, the plating bath should be replaced on a regular schedule; under normal operating conditions, it is recommended to refresh the bath solution every 3 to 6 months.
Precautions
1. The undiluted HY-2 (A) solution is essentially neutral, while the undiluted HY-2 (B) solution is slightly acidic; avoid swallowing and prevent splashing into the eyes.
2. Due to changes in time or temperature, the product color may vary slightly, but this does not affect its performance.
Packaging, Storage, and Transportation
25 kg, 200 kg, 1,000 kg (Note: packaging is in plastic drums)
Packaging, storage, and transportation shall comply with non-hazardous goods requirements.
Shelf life: one year
Keywords:
HY-2 Paint Mist Coagulant
Related Cases
Shandong Longma Heavy Industry Group is dedicated to the R&D and manufacturing of high-end castings and precision bearings, with a strong presence in the wind-turbine bearing sector. Kexing’s QH—fully synthetic metalworking fluid—is widely used in wind-turbine bearings and wind-turbine castings (such as hubs and bases), while the HJ-921C cleaning agent meets the industry’s stringent requirements for residual salt levels. Senior management at Longma highly commends the quality of Kexing Chemical’s products, and Kexing Chemical is the exclusive supplier of all chemical auxiliaries used in machining operations.
Wanxiang Group is dedicated to cutting-edge research, technological development, and application-oriented manufacturing in the fields of clean energy and intelligent motion control, operating on a global scale and ranking among China’s Top 500 enterprises. Over the years, its products—including Kexing cleaning agents, metalworking fluids, rust inhibitors, anti-rust oils, and anti-wear hydraulic oils—have been supplied as complementary components to Qianchao Bearings and Wanxiang Precision, both subsidiaries of the Wanxiang Group.
Riyue Heavy Industry Co., Ltd. is a publicly listed company specializing in the integrated R&D, innovation, application, manufacturing, sales, and service of metal materials and new energy technologies, with a particular focus on casting and machining. The company excels in producing large-section ductile iron components for critical heavy equipment, holding a leading position in the industry. Kexing offers complementary services, including cleaning agents, cutting fluids, and rust inhibitors.
Founded in 1907, the SKF Group is now one of the world’s largest manufacturers of rolling bearings, operating more than 80 plants and producing a wide range of bearings, seals, and specialty bearing steels. The company accounts for 20% of global bearing output and serves customers in 130 countries and regions. Kexing’s W1-100 cleaning oil, HJ-921 series heavy-oil scale cleaners, NK series grinding fluids, JS series rust inhibitors, and GJ-1 series ultra-pure oils are used as supporting products for SKF and have earned the company’s recognition and appreciation.
(1) In October 2020, Kexing Chemical solved the global challenge of “cleaning after carbonitriding” for SKF’s Changshan plant.
(2) In 2021, Kexing Chemical was selected by SKF as the sole domestic supplier to replace foreign brands.
(3) In May 2024, Kexing Chemical creatively implemented the industry’s first “online impurity-removal oil management patent technology” in SKF’s “280-ton chip-fluid tank long-life management” project, thereby resolving the issue of “degraded cleaning performance” at SKF’s Xinchang plant caused by “oil adhesion on the outer ring” in the “Phase II Precision Grinding Line No. 63.”
LEAVE US A MESSAGE
If you are interested in our products, please feel free to contact us to discuss potential collaboration.
Nantong Kexing Chemical Co., Ltd.
Telephone
Address
No. 80, Tonggang Road, High-tech Industrial Development Zone, Haian City, Jiangsu Province, China.
Scan to connect