KX-901 Fast-Drying Cleaning Oil
Category:
Product Features:
★ This product is stable, with extremely low aromatic hydrocarbon content, a mild odor, and low flammability, significantly enhancing safety.
Material: Suitable for removing surface oil and grease from common metallic materials such as iron, steel, aluminum and its alloys, carbon steel and its alloys, and stainless steel.
Application: Effective against common industrial contaminants including mineral oils, animal and vegetable oils, adhesive residues, and light wax deposits.
Equipment: Can be used in conjunction with ultrasonic cleaning equipment or recycled and reused in recirculating systems.
Service Hotline: +86-513-88442062
Consult
Product Details
This cleaning agent is a high-purity solvent-based cleaner produced via synthetic methods, and can replace hazardous products such as gasoline, kerosene, turpentine, stain-removal solvents, and acetone for cleaning purposes.
Typical Data
| Project | Quality indicators | |
| Distillation range | Initial boiling point, °C | ≥230 |
| Final boiling point, °C | ≤285 | |
| Flash point (closed cup), °C | ≥96 | |
| Kinematic Viscosity (40°C), mm²/s | 2.7 | |
| Aromatic hydrocarbon content (mass fraction), % | ≤0.01 | |
| Density (20°C), kg/m³ | 700-800 | |
| Saybolt Color Number | ≥+30 | |
| Sulfur content, mg/kg | ≤1 | |
| Copper Strip Corrosion (50°C, 3 h) | Qualified | |
| Bromine index (mg Br/100 g) | ≤100 | |
| Mechanical impurities (%) | <0.01 | |
Precautions
How to use
Manual cleaning: Apply the cleaning agent to the oily surface, allow it to soak and loosen the grime, then wipe clean with a cloth.
Soaking Wash: Wet the workpiece to be cleaned in the cleaning solution and allow it to soak for a duration determined by the extent of oil contamination. After washing, remove the workpiece and let it air-dry naturally (high-temperature drying is not recommended).
Equipment cleaning: Place the cleaning agent in the cleaning tank of an ultrasonic cleaner or similar equipment, then immerse the workpieces for cleaning. After washing, remove the workpieces and allow them to air dry naturally. (High-temperature drying is not recommended.)
Precautions
1. This product must not be mixed with other cleaning agents, as this may render the cleaning agent ineffective or result in unforeseen consequences.
2. This product must not come into contact with eyes or mouth, and is not for consumption. If it accidentally gets into the eyes, rinse thoroughly with plenty of water. If swallowed, drink plenty of water and seek medical attention if necessary. Keep out of reach of children.
3. This product has a strong degreasing power; it is recommended to wear corrosion-resistant gloves when using it. Keep it away from high heat and ensure adequate ventilation during use. Store it in a sealed container at a temperature between 5°C and 30°C, in a shaded, well-ventilated area, and away from any ignition sources. Prolonged standing may cause layering, which is normal; simply stir thoroughly before use. Use in a well-ventilated environment only; never use in enclosed spaces. This product is volatile; when used in an open container, water can be added to the top layer to create a seal.
4. Note: The product color may vary slightly over time or with changes in temperature, but this will not affect its performance.
Packaging, Storage, and Transportation
200 L (Note: The packaging is a steel drum.)
Packaging, storage, and transportation shall comply with non-hazardous goods requirements.
Shelf life: one year
Keywords:
KX-901 Fast-Drying Cleaning Oil
Related Cases
Shandong Longma Heavy Industry Group is dedicated to the R&D and manufacturing of high-end castings and precision bearings, with a strong presence in the wind-turbine bearing sector. Kexing’s QH—fully synthetic metalworking fluid—is widely used in wind-turbine bearings and wind-turbine castings (such as hubs and bases), while the HJ-921C cleaning agent meets the industry’s stringent requirements for residual salt levels. Senior management at Longma highly commends the quality of Kexing Chemical’s products, and Kexing Chemical is the exclusive supplier of all chemical auxiliaries used in machining operations.
Wanxiang Group is dedicated to cutting-edge research, technological development, and application-oriented manufacturing in the fields of clean energy and intelligent motion control, operating on a global scale and ranking among China’s Top 500 enterprises. Over the years, its products—including Kexing cleaning agents, metalworking fluids, rust inhibitors, anti-rust oils, and anti-wear hydraulic oils—have been supplied as complementary components to Qianchao Bearings and Wanxiang Precision, both subsidiaries of the Wanxiang Group.
Riyue Heavy Industry Co., Ltd. is a publicly listed company specializing in the integrated R&D, innovation, application, manufacturing, sales, and service of metal materials and new energy technologies, with a particular focus on casting and machining. The company excels in producing large-section ductile iron components for critical heavy equipment, holding a leading position in the industry. Kexing offers complementary services, including cleaning agents, cutting fluids, and rust inhibitors.
Founded in 1907, the SKF Group is now one of the world’s largest manufacturers of rolling bearings, operating more than 80 plants and producing a wide range of bearings, seals, and specialty bearing steels. The company accounts for 20% of global bearing output and serves customers in 130 countries and regions. Kexing’s W1-100 cleaning oil, HJ-921 series heavy-oil scale cleaners, NK series grinding fluids, JS series rust inhibitors, and GJ-1 series ultra-pure oils are used as supporting products for SKF and have earned the company’s recognition and appreciation.
(1) In October 2020, Kexing Chemical solved the global challenge of “cleaning after carbonitriding” for SKF’s Changshan plant.
(2) In 2021, Kexing Chemical was selected by SKF as the sole domestic supplier to replace foreign brands.
(3) In May 2024, Kexing Chemical creatively implemented the industry’s first “online impurity-removal oil management patent technology” in SKF’s “280-ton chip-fluid tank long-life management” project, thereby resolving the issue of “degraded cleaning performance” at SKF’s Xinchang plant caused by “oil adhesion on the outer ring” in the “Phase II Precision Grinding Line No. 63.”
LEAVE US A MESSAGE
If you are interested in our products, please feel free to contact us to discuss potential collaboration.
Nantong Kexing Chemical Co., Ltd.
Telephone
Address
No. 80, Tonggang Road, High-tech Industrial Development Zone, Haian City, Jiangsu Province, China.
Scan to connect